The whole set for the construction of a 4-meter greenhouse 3 sheets of cellular polycarbonate in the form of rolls of 2.1 m length and a diameter of 60-90 cm. The thickness of this substance is 4 mm.
If you would like, you can increase the amount of the construction to 6 yards or longer. To do this, it’s sufficient to attach a two-meter expansion. When picking a drawing, then pay attention to the space between the arches. This figure should be 65 cm, that’s the most appropriate duration for the specified depth of the material. The width of the doorways in line with the manufacturer’s drawing is 90 cm.
Before building a polycarbonate greenhouse, it is necessary to pick a location because of its place. If this is done correctly, it is possible to provide yourself with a crop of fresh vegetables for the whole year.
The location for the gidpostroy.ru future greenhouse is marked instantly in the planning of the garden plot. In order to melt the snow in the positioning of their greenhouse as early as possible, the very best point on the website is going to be a slight elevation. Additionally, in this location will not need to be concerned about higher humidity as dirt and air inside the building.
Assemble a polycarbonate greenhouse on a raised site – intends to take care of the optimal temperature inside.
When it isn’t possible to put a greenhouse on an elevated place, you will need to pour a coating of fine crushed stone about 20 cm and the same layer of fertile land to create seedbeds.
Before assembling a greenhouse in your garden plot, you should also think about where and how this construction will be installed. To begin with, you have to select a location for this. The greenhouse should be found at a well-lit area no less than a couple meters away from houses, barns and other structures.
The best way to install a greenhouse in Line with the Faces of the Planet
Make sure you measure the soil surface – it’s best to even remove the top layer. This will also eliminate weed seeds. And for ease of work, eliminate the soil in an area that’s about a meter wider on all sides of the rectangle you desire.
It’s also worth thinking about using a foundation. As manufacturers state, today most greenhouses don’t need that, especially if they (greenhouses) are utilized only in the summer and spring period. But, seasoned anglers still suggest earning an elementary foundation from a pub. It is very simple – it is sufficient to connect with each other using metal screws and corners four parts of wood with a cross-section of 10 * 10 cm. The size of such a base ought to be equal to the base of the future greenhouse.
Simple bar foundation
You might even produce a strip foundation of concrete. He is more dependable than a bar foundation, but demands more financial and labour costs. By the way, the greenhouse, that will be used in the winter, with no and don’t do without it at all.
Stages of the formation of a strip base: a schematic representation
Many producers advise to set up greenhouse structures without even creating a base. Even for this use, they equip the framework with specific T-shaped legs, so that the structure was securely fixed. However, as practice shows, it’s still vital to build a foundation: so and the basis will be more securely fixed and the elements of the foundation in touch with the soil, will be kept much longer in its original state.
The most important thing is to take care of the material with special agents to protect the timber from moisture. The material is usually installed on concrete blocks which are dug into the soil. For a six-meter structure, they need 10 bits: four on each side and one at the middle of the endings.
Before you do the greenhouse , you will need to select the perfect spot for it. It has to be an even site, so that the frame was found equally, without distortions. It needs to be bright and never obscured by buildings or trees.